Hoşgeldiniz
Hızlı ve Güvenli Alışverişe Giriş Yapın!
Şifremi Unuttum
Üye Değil misiniz?
Kolayca Üye Olabilirsiniz.
Merck 109099 Iodine solution c(I₂) = 0.05 mol/l (0.1 N) Titripur® Reag. Ph Eur 1 L

Merck 109099 Iodine solution c(I₂) = 0.05 mol/l (0.1 N) Titripur® Reag. Ph Eur 1 L

Kategori
Volumetrik Çözeltiler
Marka
MERCK
Stok Kodu
LB.M.109099.1000
2.161,50 TL + KDV
2.593,80 TL
Ücretsiz Kargo
Ürün Detayları
Önerileriniz
Taksit Seçenekleri
Ürün Detayları
Merck 109099 Iodine solution c(I₂) = 0.05 mol/l (0.1 N) Titripur® Reag. Ph Eur
Catalogue Number 109099
Product Information
Grade Reag. Ph Eur
HS Code 3822 90 00
Quality Level MQ100
Physicochemical Information
Density 1.02 g/cm3 (20 °C)
pH value 3.5 (H₂O, 20 °C)
Safety Information according to GHS
Hazard Pictogram(s) Hazard Pictogram(s)
Hazard Statement(s) H373: May cause damage to organs through prolonged or repeated exposure if swallowed.
EUH210: Safety data sheet available on request.
Precautionary Statement(s) P260: Do not breathe dust/ fume/ gas/ mist/ vapours/ spray.
P314: Get medical advice/ attention if you feel unwell.
P501: Dispose of contents/ container to an approved waste disposal plant.
Signal Word Warning
Storage class 10 - 13 Other liquids and solids
WGK WGK 2 obviously hazardous to water
Disposal 28
Aqueous solutions: Container D.
Storage and Shipping Information
Storage Store at +15 °C to +25 °C.
Specifications
Form liquid
Amount-of-substance concentration 0.04975 - 0.05025
Measurement uncertainty +/- 0.00015
Traceability NIST SRM
Accreditation: This volumetric solution is analyzed by our calibration laboratory D-K-15185-01-00 which is accredited according to
DIN EN ISO/IEC 17025 for analysis of amount-of-substance concentrations in volumetric solutions by DAkkS (Deutsche Akkreditierungsstelle - German National Accreditation Body). The accreditation certificate can be found at www.sigmaaldrich.com/ISO17025.
The concentration is determined by volumetric titration and refers to 20°C.
The amount-of-substance concentration of this volumetric solution is determined with standardized sodium thiosulfate solution (article number 1.09147). The sodium thiosulfate solution is standardized and traceable to a primary standard reference material (SRM) from the National Institute of Standards and Technology, Gaithersburg, USA (NIST SRM 136 potassium dichromate) by means of volumetric standard potassium iodate (article number 1.02404), certified reference material according to ISO 17034, analyzed by our accredited calibration laboratory of Merck KGaA, Darmstadt, Germany according to DIN EN ISO/IEC 17025. The uncertainty is expressed as expanded measurement uncertainty with a coverage factor k=2 covering a confidence level of 95%.
Note: The titer is a correction factor to correct for variations of the volumetric solution, the titration equipment, the temperature and other laboratory conditions. For correct titration results it is recommended to determine a titer with the laboratory specific equipment and under laboratory specific conditions directly after opening a new bottle and at regular time intervals.
Taksit Seçenekleri
Önerileriniz
Bu ürünün fiyat bilgisi, resim, ürün açıklamalarında ve diğer konularda yetersiz gördüğünüz noktaları öneri formunu kullanarak tarafımıza iletebilirsiniz.
Görüş ve önerileriniz için teşekkür ederiz.
Etiketler :
Merck Merck kimyasalları Merck türkiye Merck millipore Merck millipore türkiye Merck kimyasalları satış Merck kimyasalları msds merck kimyasal msds merck 109991
Merck 109099 Iodine solution c(I₂) = 0.05 mol/l (0.1 N) Titripur® Reag. Ph Eur 1 L Merck 109099 Iodine solution c(I₂) = 0.05 mol/l (0.1 N) Titripur® Reag. Ph Eur 1 L LB.M.109099.1000
Merck 109099 Iodine solution c(I₂) = 0.05 mol/l (0.1 N) Titripur® Reag. Ph Eur 1 L

Tavsiye Et

*
*
*
IdeaSoft® | E-Ticaret paketleri ile hazırlanmıştır.