Sigma-Aldrich 739332 Poly(3,4-ethylenedioxythiophene)-poly(styrenesulfonate) .1% in H2O, surfactant-free, high-conductivity grade 100 gr
Kategori
Marka
Stok Kodu
LB.SA.739332-100G
Kısa Bilgi
Synonym(s): Orgacon™ ICP 1050, PEDOT:PSS, Poly(2,3-dihydrothieno-1,4-dioxin)-poly(styrenesulfonate) MDL number: MFCD07371079 NACRES: NA.23
| Sigma-Aldrich 739332 Poly(3,4-ethylenedioxythiophene)-poly(styrenesulfonate) .1% in H2O, surfactant-free, high-conductivity grade 100 gr |
| Synonym(s): Orgacon™ ICP 1050, PEDOT:PSS, Poly(2,3-dihydrothieno-1,4-dioxin)-poly(styrenesulfonate) MDL number: MFCD07371079 NACRES: NA.23 |
|
PROPERTIES
grade high-conductivity grade
Quality Level 100 form liquid greener alternative product characteristics Design for Energy Efficiency, Learn more about the Principles of Green Chemistry. concentration 1.1% in H2O resistance <100 Ω/sq, <80% visible light transmission (40μm wet) refractive index n20/D 1.334 pH <2.5 viscosity 30-100 cP(20 °C) density 0.999 g/mL at 25 °C greener alternative category Enabling, storage temp. 2-8°C DESCRIPTION General description Aqueous surfactant-free dispersion of high conductivity grade PEDOT:PSS polymer. Optimal performance in transparent conductive coatings may require addition of formulation ingredients (e.g. surfactants and high-boiling solvents).Conducting polymer such as poly(3,4-ethylenedioxythiophene) doped with poly(styrene sulfonate) anions (PEDOT/PSS) is widely used in various organic optoelectronic devices.[1][2][3] PEDOT: PSS is a blend of cationic polythiopene derivative, doped with a polyanion. High electrical conductivity and good oxidation resistance of such polymers make it suitable for electromagnetic shielding and noise suppression. Thus, the polymer film was found to possess high transparency throughout the visible light spectrum and even into near IR and near UV regions, virtually 100% absorption from 900-2,000 nm. No absorption maximum from 400-800 nm. Impact of small electric and magnetic fields on the polymer was studied. [4] Poly(3,4-ethylenedioxythiophene)-poly(styrenesulfonate) (PEDOT:PSS) is a conductive polymer without a high boiling solvent (HBS), that is formed by electropolymerizing 3,4-ethylenedioxythiophene in a solution of poly(styrenesulfonate) (PSS). PEDOT is doped with positive ions and PSS with negative ions. It has the following properties that make it a viable polymer in organic electronics.[5][6][7] We are committed to bringing you Greener Alternative Products, which adhere to one or more of the 12 Principles of Green Chemistry. This product is used in energy conversion and storage, thus has been enhanced for energy efficiency. Click here for more information. Application PEDOT:PSS can be used as an electrode material with high mobility for charge carriers. It can be used for a wide range of energy based applications such as organic photovoltaics (OPV), perovskite solar cells (DSSCs), organic light emitting diodes (OLEDs) and other biomedical sensors.[8][9][10][11] Used to prepare highly transparent conductive coating formulations.[12] Primary and secondary nucleation by introducing PEDOT:PSS in a hydrogel was studied. Virtually 100% absorption from 900-2,000 nm. No absorption maximum from 400-800 nm. Conductive polymer blend. Legal Information Product of Agfa-Gevaert N.V. Orgacon is a trademark of Agfa-Gevaert N.V. |
